Native Union Honeycomb - Manual (Page 16)

15 CHOOSE YOUR MM04i RINGTONE
You can define how you want your MM04i to ring on incoming calls. You have a choice of 2 ringtones.
f) To enter the ringtone selection mode on you MM04i, press and hold for 2 seconds
Volume + (+) and Volume – (-) buttons together. Your MM04i will then play the first
ringtone repeatedly.
g) To select a ringtone, short press the MFB (O) button and the Volume + (+) button together. Each
press of those combine buttons will play the next ringtone.
h) To adjust the volume of the selected ringtone, short press the Volume + (+) or Volume – (-) button.
i) To confirm the selected ringtone and leave the ringtone selection mode, press and hold for 2
seconds Volume + (+) and Volume – (-) buttons together.
AUTOMATIC RECONNECTION
The MM04i is designed to reconnect to your phone automatically.
If you take your phone out of range of the MM04i for more than 30 seconds (without turning the
MM04i off), and then come back into range the MM04i will search for your phone and reconnect
automatically.
It can take up to 25 seconds for the MM04i to find your phone and reconnect.
The MM04i will only automatically reconnect to the last two connected phones. If your phone is not
one of the last two connected phones then you will have to reconnect to the MM04i using your
phone's Bluetooth menu.
In addition, the MM04i will not reconnect automatically if you manually disconnected your phone from
the MM04i using your phone's Bluetooth menu. In this case you will need to use your phone's
Bluetooth menu to reconnect.