Step 3c—external tape expansion, Step 3b—storage adapters/controllers (continued) – Compaq Labtec LCS 800 User Manual
Page 8
AlphaServer 800 Pedestal–Rackmount
2.32 Alpha Servers
Step 3b—Storage Adapters/Controllers (continued)
DSSI Controllers
Maximum # Supported
Order Number
Description
DIGITAL UNIX
V4.0B
OpenVMS
V7.1-1H1
KFPSA-AA
PCI-based one port DSSI adapter (OpenVMS systems only)
—
4
BC29S-xx
For KFPSA PCI based DSSI controller. KFPSA to any external
“Micro-Ribbon” DSSI right-angle connection (all other DSSI systems
and storage devices requiring right-angle connection) requires
BC29S-xx DSSI cable.
BC29S-09
For KFPSA PCI based DSSI controller. Order BC29S-09 DSSI cable
for HSD10 in BA36R-Ax shelves
Step 3c—External Tape Expansion
External tape drives are also supported on optional PCI-based SCSI adapters.
-
KZPAA-AA—maximum bus length including cable and tape device cannot exceed 3.0 meters.
-
KZPSA-BB—maximum bus length including cable and tape device cannot exceed 25.0 meters.
External tape drives are not supported on KZPAC-xx UltraSCSI RAID controllers on systems running DIGITAL UNIX
or OpenVMS.
External Tapes
Minimum level of operating system required: DIGITAL UNIX V4.0B, OpenVMS V7.1-1H1.
TLZ09-DB
4.0/8.0 GB 4 mm DAT tabletop tape drive with 50-pin LD SCSI port. Includes BN23G-01 with one
male 50-pin LD connector and one male 50-pin HD connector.
TLZ9L-DB
1,2
32/64 GB 4 mm DAT tabletop autoloader with 50-pin LD SCSI port. Includes BN23G-01 cable with
one male 50-pin LD connector and one male 50-pin HD connector.
DS-TLZ10-DB
12/24 4mm DAT SCSI tabletop tape drive. Requires SCSI cable BN23G-01 (for 50-pin HD host) or
BN31W-01 (for 68-pin HD host)
1. Includes four cartridge loader. Larger magazines are supported.
2. Base operating systems support sequential backup mode only; additional software is required for random access backup.
See Storage Devices section for details.
KZPAC-SB
(.5 METER)
KZPAC-CA/CB
KZPAC-CA/CB