Nextteq VeriFit Irritant Smoke Generators for Respirator Fit Testing - Manual (Page 6)

Page 3 of 24
VeriFit Irritant Smoke Generators Manual
Nextteq LLC 8406 Benjamin Road, Suite J, Tampa, FL 33634 USA
PN 50811300-340N Rev F 5/09
III. WARNINGS
1. Before using this product, read, understand, and comply with all
labels, warnings, instructions, and other literature accompanying
the product including but not limited to this manual, the MSDS
in this manual (also available as PN 50811320-340N), and the
Sensitivity Check Protocol (PN 50811340-340N - see www.
nextteq.com). Failure to comply with all warnings and instructions
could cause property damage, serious injury or death.
2. Operate the product in strict compliance with manufacturer’s
specifications and instructions. Not using this product in
accordance with the manufacturer’s specifications and instructions
may result in property damage, serious injury,
or death.
3. Be thoroughly familiar with this product, the manufacturer’s
instructions and warnings, and associated equipment before using
this product.
4. Inspect this product and associated equipment for damage or
defects before using. Do not proceed with Respirator Fit Testing
or Sensitivity Check if this product or associated equipment is
damaged or defective.
5. Keep all bystanders away from this product during use or testing.
6. Do not remove, alter, or cover any label, instruction, or warning.
7. Use only in well-ventilated areas to prevent the buildup of
smoke or fumes. The buildup of smoke or fumes may increase
the concentration of the smoke or fumes to dangerous levels,
resulting in property damage, serious injury or death.
8. Do not use under a hood or other enclosed area. Do not use in
a confined space. Use under a hood, other enclosure, or in a
confined space may increase the concentration of fumes or smoke
to dangerous levels, resulting in property damage, serious injury
or death.
Warnings