Outdoor Great Room Lodge II Pergola - Manual (Page 8)

Lodge II Pergola Assembly Instructions – Column Assembly 6
Step 9:
Insert feet into column “A” base and fasten with bolt “T”
making sure to use a washer, and lock-washer. If feet fit
tightly, a rubber mallet may be used to force beams into
place. Tighten securely and repeat for the three remaining
columns.
Step 10:
Stand columns up on footings or surface to be mounted to in
approximate final positions given by the center-to-center
distances shown at right. Columns feature a decorative
engraving on one side, so be sure to keep this in mind while
orienting columns. Ensure columns are adequately
supported until at least A-frame sections are bolted in
place.