Ryobi R10631 - Manual (Page 2)

Page 2
Look for this symbol to point out important safety precautions. It means attention!!!
Your safety is involved.
The following recommended accessories are current and were available at the time this manual was printed.
■
5-1/2 in. (140 mm) Thin Kerf Blade
ACCESSORIES
The operation of any power tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z871.1.
WARNING:
■ Table of Contents ............................................................................................................................ 2
■ Accessories ..................................................................................................................................... 2
■ Unpacking ........................................................................................................................................ 2
■ Rules For Safe Operation ............................................................................................................. 3-6
A. Important Safety Rules For Battery Tools ................................................................................ 4
B. Important Safety Instructions For Charger ............................................................................... 5
C. Important Safety Instructions For Circular Saws ................................................................... 5-6
■ Features ........................................................................................................................................... 7
■ Operation .................................................................................................................................... 8-18
■ Maintenance .................................................................................................................................. 19
■ Battery Pack Removal and Preparation For Recycling .................................................................. 19
■ Parts Ordering / Service ................................................................................................................ 20
TABLE OF CONTENTS
Your circular saw has been shipped completely assembled
except for the blade. Inspect it carefully to make sure no
breakage or damage has occurred during shipping. If any
parts are damaged or missing, contact your nearest Ryobi
Authorized Service Center to obtain replacement parts before
attempting to operate saw. A blade, blade wrench, and this
operator's manual are also included.
UNPACKING
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.