Chicago Electric Charge Regulator 96728 - Manual (Page 4)

SKU 96728 For technical questions, please call 1-800-444-3353 Page 4
Read all instructions and warnings on any 12 volt DC battery before connecting 4.
the Charge Regulator to a battery.
Do not expose the Charge Regulator to rain or wet conditions.
5.
Always unplug the Charge Regulator from its power source before performing 6.
any inspection, maintenance, or cleaning procedures.
Use caution not to short circuit and/or reverse the polarity of the load, solar panel,
7.
or battery.
Keep the Charge Regulator in a cool, ventilated location.
8.
Repairs should be carried out only by a qualified technician. 9.
The warnings, precautions, and instructions discussed in this instruction manual 10.
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE inSTRUCTiOnS.
SPECiFiCATiOnS
electrical
Requirements
Power Input: Solar Panel / 22 VDC, 7 AMP, 100 Watt Maximum
Power output: 12 VDC Battery
Automatic
over-Charge
Protection
14V (+0.5V)
Automatic
Discharge
Protection
10.5V (+0.5V)
operating
Temperature
14º Fahrenheit to 108º Fahrenheit
LeD Indicators green = High Voltage / Yellow = Charging / Red = Low Voltage
Connectors
2-Way Plug (+/--) = Solar
2-Way Plug (+/--) = Battery
3” Pigtail = Load