Waterworks Sentinel II Ceiling Mounted Round Lighting - Manual (Page 2)

Care and Cleaning
The lustrous finish on your fitting or fixture should be treated with
care. To clean the finish, wipe gently with a soft damp cloth and
then with a soft dry towel. A mild soap solution can be used for
daily cleaning. The use of non-recommended polishes, abrasive
cleaners, solvents,ammonia-basedproducts, or acid-based
cleaners may damage the finish. Please know that improper
handling or cleaning may damage the surface of the finish and
consequently
void the warranty.
Water contains lime and other minerals that are deposited after
the water has evaporated. You can prevent deposits from forming
by always wiping the fitting or fixture dry after use.
Please note the following points are specific to certain finishes or
products only. Always read and follow the instructions when using
any cleaning or polishing products.
In addition to mild soap and water, a non-abrasive basin tub and tile cleaner is
recommended for regular cleaning and disinfecting. Do not use abrasive cleaners
or cleansers, as this will dull the surface finish. The use of any other cleaners or
disinfectants may alter the surface finish.
Tin Coated Interior - Tin is a soft metal and should only be
regularly cleaned with mild soap and water. The use of any other
cleaners or disinfectants will alter the surface finish, removing the
tin.
Copper Exterior - In addition to mild soap and water, a natural
citrus-based product may be used for regular cleaning. The use of
any other cleaners or disinfectants may alter the surface finish.
Cape Cod® Polishing Cloths may be used for occasional polishing.
If you desire additional protection, the use of Faucet Brite® will
aid in cleaning and protecting the surface finish from mineral
deposits present in your water supply. Faucet Brite® should be
reapplied as necessary for continued protection.
J et Fresh® whirlpool cleaning solution is recommended for
maintaining the waterways.
Select Waterworks fittings and basins are offered in finishes that
have been artificially weathered, creating a patina that will
develop and change with time. In addition to mild soap and
water, a natural citrus-based product may be used for regular
cleaning. The use of any other cleaners or disinfectants may alter
the surface finish. Please note that prolonged contact with certain
items such as toothpaste, acidic fruits and vegetables, and wines
will alter the surface finish. The use of polishing agents will
remove the patina and restore the metal to its original shine. Once
removed, the patina will naturally redevelop
with time.
In addition to mild soap and water, a natural citrus-based product
may be used for regular cleaning. The use of any other cleaners or
disinfectants may alter the surface finish. Please note that
prolonged contact with certain items such as toothpaste, acidic
fruits and vegetables, and wines will alter the surface finish. The
use of polishing agents will remove the finish.
In addition to mild soap and water, a natural citrus-based product
may be used for regular cleaning. The use of any other cleaners or
disinfectants may alter the surface finish. Cape Cod® Polishing
Cloths may be used for occasional polishing. If you desire
additional protection, the use of Faucet Brite® will aid in cleaning
and protecting the surface finish from mineral deposits present in
your water supply. Faucet Brite® should be reapplied as necessary
for continued protection.
Fittings offered in a silver finish will tarnish with age. This finish may
be restored to its original luster by using Faucet Brite® or a
non-abrasive silver polish. Faucet Brite®should be reapplied as
necessary for continued protection and will help to prolong the
time between regular polishing.
Items purchased in unlacquered brass and copper finishes will
change with time as they develop a natural patina. The original
shine can be restored using Faucet Brite® or an appropriate
polishing compound. If you desire additional protection, the use of
Faucet Brite® will aid in cleaning and protecting the surface finish
from mineral deposits present in your water supply. Faucet Brite®
should be reapplied as necessary for continued protection.
Soapy water, ammonia based cleaners or commercially available
solid surface cleaners will remove most dirt and residue from
Corian® surfaces. Stubborn residue will require a slightly stronger
cleaner. Follow the recommendations at www.corian.com to
properly clean your vanity top or sink.
All wood furniture surfaces should be maintained with a soft, damp
cloth. Paste wax canbe applied to the furniture every six months.
Commercial or residential use citrus-based sprays are not
recommended for cleaning the furniture.
Waterworks is a registered trademark of Waterworks Inc.