Woo Audio WDS-1 User Manual
Page 11
©2012 WOO AUDIO
tm
Inc. All rights reserved.
www.wooaudio.com
Rev 1.1. Feb 20, 2014
11
Powering Up
To power up on the WTP-1 press the power button
⑪ until pressure is felt and
the VFD screen should turn on.
To power up on the WDS-1 press the power button
⑫ until pressure is felt and
the VFD screen should turn on.
If you buy both WTP-1 and WDS-1 and decide to stack them. The power button
on the WTP-1
⑪ becomes a simultaneous power button and will be able to
power up both WTP-1 and WDS-1 at the same time. Refer to Installing the
Power Cord on how to do this.
Connecting the WTP-1 with the WDS-1:
Here at Woo Audio we believe flexibility is extremely important, which is why
we offer three ways to pair the WTP-1 and WDS-1 together; Optical
⑤,
AES/EBU
⑥, Coaxial ⑦ refer to the above diagram.*
*These three connections allow for 16-Bit/44.1kHz CD quality of music for your
listening pleasure.