Woo Audio WDS-1 User Manual
Page 13
©2012 WOO AUDIO
tm
Inc. All rights reserved.
www.wooaudio.com
Rev 1.1. Feb 20, 2014
13
Configuring media player
TIPS: It is strongly recommended to use a media player that supports ASIO output
mode for the highest playback quality.
Changing Output mode
Example is given for JRiver Media Center.
IMPORTANT: In JRiver Media Center, disable “Use large hardware buffers” option
by unchecking the box. Buffering error will occur if this option is enable.
Connecting the Amp to the WDS-1:
The WDS-1 offers two sources of output, XLR
⑨ and RCA ⑩ refer to the above
diagram to connect the amp of your choice. We highly recommend one of our
Woo Audio Amplifiers.
Tools -> Options -> Audio Output -> Output mode -> select ASIO
Tools -> Options -> Audio Output -> Output mode settings -> uncheck the box
below