Zigen HX-88 - Manual (Page 27)

Matrix Switching System—User Manual
27
7.0.3.3 LAN IP Function
Activation Function:
In the main configuration menu, select Options button to prop up the Windows Internet
Explorer dialog box, click
“OK” to show the IP configuration screen as shown in Figure
7-11
Figure 7-13
In the Network Settings configuration, you can set the IP information by yourself (Fix IP)
or click the Enable DHCP check box to get the IP from the DHCP (Float IP).
 Click the Default button to restore to default IP address. After changing the IP, you
have to restart (power off then power on) the Host to make the changed values take
effect.
 You can also use the blue Dip Switch on the rear panel of the Host to reset the IP.