Zigen HX-88 - Manual (Page 8)

Matrix Switching System—User Manual
8
 STO: The “Store Key” saves all current input/output corresponding relations.
- Press the “STO” key. (Supports up to 8 sets of memories, you can select the
memory location through OUT1~OUT8)
- Arrang the Output and Input channel combinations (output channel key 1~8).
- The relation between the Output and Input settings will be saved in the memory
permanently.
 RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
- Press the “RCL” key.
- Then make a selection from one of the output channel key 1~8.
- The system will retrieve the saved input/output status and implement current
staus switching.
 EDID: FIX (fix mode) and TV1 (access the first output channel) selection key.
- FIX mode: The HX-88 will supply a set of fixed EDID values to support up to only
1080P high performance TV.
- TV1 mode: The HX-88 will accecc the EDID values of high performance TV that
is connected to the first output channel, and copy the EDID value to all the input
channels so that the DVD players and etc can support the same values to all
HDTV monitors.
 LCD: LCD display shows current HDMI matrix status and operation status.
5.0.2 Rear Panel
Figure 5-2 HX-88 Rear Panel
The HX-88 supports up to 8 input/output connectors on the rear panel, each female
terminals form the signal input/output connectors. The HX-88 signal input/output terminal
channels are numbered from right to left as OUT1~4 / IN1~8 / OUT5~8 channels. The
input terminal channels supply you to connect to different equipment including DVD
players and graphics workstations. The output terminals can be connected to projectors,
video recorders, HD displays and etc.