Zigen CX-100 - Manual (Page 8)

Page 4
※DIP switch setting instruction:
ZIG-CX-100 Tx
Position1 Function
0
Transfer video with AUTO mode .
1
The input signal after processed output. .
Position2 Function
0 1080P stereo (Using Embedded EDID) (note1)
1
Trigger EDID Copy .
Position3 Position4 Function
0 0 1080P 3D 2CH (Using Embedded EDID) (note2)
0 1 1080P 8CH (Using Embedded EDID) (note3)
1 0 1080P 3D 8CH (Using Embedded EDID) (note4)
1 1 EDID copy
Note1: This is EDID COPY trigger switch. When Position 3 - Position 4 is 1.1.
Note2: Use embedded 1080P 3D 2-CH EDID when the DIP switch is in this mode. The EDID
will be 1080P 3D video and 2-CH audio.
Note3: Use embedded 1080P-7.1 EDID when the DIP switch is in this mode. The EDID will be
1080P video and 7.1 audio.
Note4: Use embedded 1080P 3D 7.1 EDID when the DIP switch is in this mode. The EDID will
be 1080P 3D video and 7.1 audio.