Liquid level probe, Cleaning the coffee brewer, Cleaning glass decanter – Wilbur Curtis ALPHA 6GTN Fresh-Trac User Manual

Page 10

Advertising
background image

10

Liquid Level Probe

Cleaning intervals for the probe are to be determined by the user or the service

tech, based on water conditions. The use of water filters, or the type of water filter

that is being used can impact the service interval. Intervals can be from one month

to several years, however, replacing rather than cleaning the probe is preferable.

WARNING: Disconnect electrical power before removing access panels!

This procedure involves working with hot water and hot surfaces!

1. Unplug the power cord and shut off the water line.
2. Remove the top cover of the unit. Locate the top of the tank and remove the

cover.

3. Drain the tank to a level about 3” below the tip of the probe.
4. Allow some time for the probe to cool before working on the brewer.
5. Clean the tip of the probe using a Scotch-Brite™ scuff pad.
6. If scale is still visible, remove the probe and soak it in vinegar or a scale remov-

ing chemical.

7. When assembling the probe back onto the tank, make sure the tip of the probe

is pointing downward as illustrated.

Cleaning the Coffee Brewer

Regular cleaning and preventive maintenance is essential in keeping your coffee brewer looking and working like new.

CAUTION – Do not use cleansers, bleach liquids, powders or any other substance containing chlorine. These

products promote corrosion and will pit the stainless steel. USE OF THESE PRODUCTS WILL VOID THE

WARRANTY.

1. Wipe exterior surfaces with a moist cloth, removing spills and debris.
2. Slide the brew cone out and clean it. Clean the spray head area with a moist clean cloth.
3. Rinse and dry the brew cone.
4. Drain drip tray of coffee. Wash out the drip tray. Dry the tray.
5. Rub a stainless steel polish on the outside surfaces to protect the brewer.

Cleaning Glass Decanter

Curtis glass decanters are dish-washer safe. Coffee decanters may be hand washed.

1. Prepare a mild solution of detergent and warm water.
2. Immerse the decanter in detergent solution and clean with a sponge brush.
3. Thoroughly rinse out the glass decanter with clean warm water.
4. Dry the decanter.

WARNING – To Avoid Damage or Injury

l

Do not boil dry or heat pot when empty.

l

Do not clean with materials that scratch.

l

Do not use gas flame or range top of any kind.

l

Do not pour towards people.

l

Do not carry two decanters in one hand.

l

Clean only with mild detergent or an urn cleaning solution specifically intended for coffee decanters.

LIQUID LEVEL PROBE

HEATING TANK

Advertising
This manual is related to the following products: