Wilbur Curtis G4GEMT - Manual (Page 15)

15
4
2
1
3
6
5
8
7
9
10
12
11
1
1A
2
3
4
5
6
7
7A
8
9
9A
10
11
12 WC-5622
WC-3307
WC-2102
WC-2005*
WC-2010C
WC-2025*
WC-2006*
WC-1800
WC-1841
WC-3705*
WC-1901A
WC-1901A-103K*
WC-37102
WC-3503
WC-114R LID, SATELLITE PLASTIC GEM3
LID, SATELLITE STAINLESS (OLDER UNITS)
GAUGE GLASS ASSEMBLY 8”
WASHER, SHIELD CAP 1/8”
SHIELD, 8 INCH GAUGE GLASS
GAUGE GLASS, 8 INCH
WASHER, SHIELD BASE 3/16”
FAUCET, S’ NON LOCKING
FAUCET, ESP BLACK NON-LOCKING PLASTIC
KIT, FAUCET S’ SERIES
SHANK, FAUCET W/SHIELD BASE
KIT, SHANK ASSY W/SHIELD BASE & O-RING
KIT, WARMER ELEMENT 100W 120V (GEM-5 & -8)
LEG, SCREW BUMPER 3/8”– 16 STD (GEM-5 & -8)
SWITCH, ROCKER (RED) 120V SPST (GEM-5 & -8)
PART № ITEM № DESCRIPTION
* Recommended parts to stock.
Illustrated Parts List
GEM-3 SATELLITE SERVER, GEM-5, WARMER,
GEM-8 WARMER SHORT
5. Clean all parts. Thoroughly rinse with clear warm water.
6. Dry and assemble the handle/bonnet parts. Hand-tighten the assembly onto the faucet.
7. Remove the gauge glass tube by unscrewing the gauge glass cap.
8. Clean the gauge glass tube and the two washers with a gauge brush and detergent solution. Rinse with clear
water. Dry the parts and assemble them onto the Satellite.
DO NOT immerse the Satellite in water or any other liquid.
9. Clean inside of the Satellite. Remove coffee residue with the detergent solution.
10. Thoroughly rinse out the Satellite with clear warm water.