CHEVROLET 190 - Manual (Page 19)

DAILY LIVING
D Do occ N No o:: 21906503 R Re ev v:: 02 Copyright © Hanmar Motor Corporation 2005 B B--5 5
REAR KING BED
If desired, place the small cushion insert at the rear of the
bed to create additional bed length, (see Picture B-P12 and
Picture B-P14).
REAR L-SHAPED LOUNGE TO DOUBLE BED
(190-Versatile & 170-Popular Models):
1. Remove the table and leg from their base and place
the table on the lateral support located on the upper
edge to seat base boxes, (see Picture B-P13).
2. Remove center dinette cushion, (see Picture B-P15).
Center dinette cushion is extra.
3. Unfold back rest cushions and place on top of table,
(see Picture B-P16).
Note: The shorter passenger side seat rest cushion
goes on the bottom, rear back rest cushion on top.
Picture B-P15: Centre dinette cushion, (Versatile
model).
Picture B-P13: Placement of support pieces for the
double bed, (Versatile model).
Picture B-P16: Placement of back rest cushions,
(Versatile model).
Picture B-P12: Small cushion insert - before
insertion, (190 Popular model).
Picture B-P14: Small cushion insert in place creates
more sleeping surface, (190 Popular model).