Playing back audio – Casio AT-5 User Manual

Page 123

Advertising
background image

Recording and Playing Audio

E-121

• You can start audio playback operations from the rhythm

mode or the song sequencer mode. You cannot start from
the card mode.

• You can perform normal keyboard play along with audio

playback, and you can use layer and split. The procedures
for selecting UPPER 1, UPPER 2, and LOWER parts are
the same as the ones used in the rhythm mode. For details,
see “Selecting a Tone” (page E-14) and “Layering and
Splitting Tones” (page E-15).

• Maximum polyphony is reduced by a maximum of two

notes during audio playback.

• Rhythm play and song sequencer song playback cannot be

performed during audio playback standby and audio
playback.

• The time counter displayed during audio playback does not

exactly match the time counter displayed during recording.

This Digital Keyboard supports playback of audio files
recorded by it, as well as audio files that you converted on a
computer to a format supported by the Digital Keyboard.

*

* Special application software (Data Manager) is required in

order to convert audio files. For details, see “Storing and
Loading Digital Keyboard Memory Data” (page E-141).

1.

Press the C-2 (AUDIO PLAY) button.

• This causes the > indicator to appear and the other

mode indicator (: or <) to disappear
from the display, which indicates the audio play mode.

• The L-17 (PLAY/STOP) button will flash, which

indicates audio playback standby.

• The audio playback screen shown below will be on the

display.

• If there is an asterisk (

*) in front of the audio file

number, it means the file already includes recorded
data.

2.

Use the dial or the R-14 (–, +) buttons to select
one the audio file numbers that has an asterisk
(

*) in front of it.

3.

Configure the following setting as required.

* For details, see “About center cancel” on page E-122.

Playing Back Audio

Supported Audio Playback Files

To play back a recorded audio file

To do this:

Do this:

Start playback from
any location
(minutes : seconds)

Use the L-15 (dFF) and L-14
(
sREW) buttons to change the time
counter reading to the location from
which you want to start playback.

Center cancel

*

Press the L-18 (PART SELECT)
button.

Audio file number

Audio file name

Time counter (minutes:seconds)

Advertising
This manual is related to the following products: