Axesstel AXW-D1900 - Manual (Page 7)

CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 7 - Connecting the World Now
Getting to know the EV-DO modem
Power Switch
Power Switch is located on the front side of the EV-DO modem.
Turn on the unit by moving switch to ON position (O). Turn off the unit by
moving switch to OFF position (|).
NOTE: When you turn on the EV-DO modem, it automatically searches for
service signal. When it successfully acquires service signal, the
signal LED turns to green, orange or red depending on signal
strength.
Connection Type Switch
Axesstel Wireless 1xEV-DO Modem lets you choose type of connection.
Connection Type Switch is located between Ethernet port and USB port.
Set this switch to Ethernet or USB depending on type of connection you
are using.
LED Indicators
LED Color Indicates
Green Power is on
Power
Off Power is off
Green Excellent signal level
Orange Good signal level
Red Poor signal level
Signal
Off No signal or service is present
Green Connected to the CDMA network
Connect
Off Not connected
Green PC connected to the modem by Ethernet
Blinking Indicates data activity Ethernet
Off No PC connected to the modem by Ethernet