OFNA Racing Ultra MBX R2 - Manual (Page 21)

3 x 10mm
Screw
3 x 10mm
Tapping Screw
Scre
w Cem
ent
ASSEMBLY OF THE SERVO AND REAR STIFFENER
34070
Rear
Stiffener
34031
Nylon Post
3 x 10mm
Tapping Screw
Steering Servo
3 x 10mm
Tapping Screw
34020
Servo Mount
34020
Servo Mount
Throttle Servo
* Arrange the servo wire
under the radio tray.
* Use the screw provided
with your radio.
30172
2mm Rod
* Use the screw provided
with your radio.
Switch
10280
Switch Cover
* Use the screw provided
with your witch.
10711
Steering
Servo Horn
3 x 10mm
Tapping Screw
3 x 10mm
Tapping Screw
* Push the cover of the receiver
box into the hole on radio tray
then screw in the screw.
* Connect the wire to
receiver.
Antenna
Wire
30560
Antenna Post
* Put the antenna wire
through antenna post.
34030
Receiver Box
* Put the receiver into
receiver box.
3mm
Flange Nut