70 assembly of the shock shafts into shock bodies, Extremely important, 68 assembly of the shock shafts – OFNA Racing X3 Sabre User Manual
Page 37: Assembly of the shock o-ring, 69 no.9, No.9
70
ASSEMBLY OF THE SHOCK SHAFTS INTO SHOCK BODIES
Assemble both left and right sides.
Oil
(LONG)
(SHORT)
(SHORT)
(LONG)
Do not push the shock
shaft straight down,
O-ring can be damaged.
Slowly twist the shock
shaft down to the
bottom. It also help if
you put a couple of
drops of shock oil in
before putting shaft
through.
EXTREMELY IMPORTANT
Oil
61
Assemble both left and right sides.
68
ASSEMBLY OF THE SHOCK SHAFTS
REAR SHOCK
(LONG)
FRONT SHOCK
(SHORT)
Step detail
Step detail
Step detail
Step detail
Use tools to tighten as shown.
94059
2.6x6x0.5
Washer
.....x4
40060
40060
94059
41011
30602
40055
41011
.....x2
40060
2.6mm
Nylon Nut
Do Not
Over Tighten
•Hold the shock rod at it's thread
with side needle nosed pliers.
•Be careful not to damage the shock
rod.
ASSEMBLY OF THE SHOCK O-RING
Assemble both left and right sides.
41019
P10 O-RING
.....x4
41012
3.5mm O-Ring
.....x8
FRONT SHOCK
41012
2mm Washer
.....x4
41012
1mm Washer
.....x4
41003 (SHORT)
41004 (LONG)
41019
41012
41012(1mm)
41012
41012(2mm)
41008
41008
41012(2mm)
41012
41012(1mm)
41012
41019
Oil
Oil
Oil
Oil
69
NO.9
BAG
NO.9
BAG
NO.9
BAG
94059
94059
94059
Use 1.4x6 holes piston for
front and rear.
x2
x2
x2
x2
x2
x2
REAR SHOCK