OFNA Racing GTP Rear Pivotball & Anti-roll Kit -- 31296 - Manual (Page 3)

0
1
R R
ASSEMBLY OF THE FRONT ANTI-ROLL BAR
ALSO. . . .
#31300 - FRONT ANTI-ROLL BAR KIT
31302
Anti-Roll
Bar Adjuster
31302
Anti-Roll
Bar Adjuster
31302
Anti-Roll
Bar Adjuster
31302
Anti-Roll
Bar Adjuster
3x16mm
Screw
3x16mm
Screw
( FRONT)
( REAR)
Anti-roll strength became weaker
Anti-roll strength became stronger
Changing the angle of the anti-roll bar
will change the strength of the arms.
*Turn the anti-roll bar adjuster
keeping both side at the same
angle.
* Keep the ball of the anti-roll bar
central.
0 0
0 0
A A
B B
C.L
C C'
SETTING GUIDE
REAR WIDTH SETTING REAR CAMBER SETTING
Adjust A and B to the same .
Adjusting B longer will make the rear tires
toe-in (Positive).
Adjusting A longer will make the rear tires
toe-out (Negative).
length
* Use a 2.5mm hex wrench to adjust
the rear track width.
The rear camber adjustment can be make by changing the length
of the upper rod.
Making the upper rod longer will make the camber positive.
Making the upper rod shorter will make the camber negative.
+ +
+ +
- -
Upper Rod
Turn
Turn
Turn
- -
PARTS LIST
Item No. Description Qty
31308 Anti-Roll Bar 1 set
31301 4x80mm Arm Shaft 2 pcs
31302 Anti Roll Bar Mount / Adjuster 1 set
36890 Front Lower Arm 1 set
31303 Rear Lower Arm 1 set
Item No. Description Qty
31304 Rear Hub (Pivot Ball Type) 2 pcs
31305 Ball Washer 4 pcs
31302 Anti Roll Bar Mount / Adjuster 1 set
31306 Alum. Hex Nut 4 pcs
31307 Pivot Ball 2 pcs.
ASSEMBLE THE FRONT AND REAR GEAR BOX ONTO YOUR CAR AS USUAL.