Compaq Keyboard/Monitor/Mouse Switch Box - Manual (Page 22)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Compaq Keyboard/Monitor/Mouse Switch Box User Guide
Writer: Kristi Wishon Project: Basic Switch Functions Comments:
File Name:F-ch03.doc Last Saved On:9/6/96 1:17 AM
The window contains keyboard information including enabled/disabled,
typematic rate, LED settings, port mode and keyboard type. The mouse
information includes enabled/disabled, sample rate, resolution, and mouse
type.
4. Press Esc to remove the Version window.
Saving the Hardware
Configuration
Whenever servers are added or removed from the system, or whenever there is
a change in the mouse or monitor, the configuration settings should be saved
to non-volatile memory (NVRAM) within the unit. If the settings are not
saved, they will be lost whenever the switch loses power or is turned off. To
save settings to memory, proceed as follows:
CAUTION: If settings are not saved and switch power is lost,
it may be necessary to reboot each computer in the system to
reestablish keyboard and mouse communications.
1. Press Print Scrn. The CCR Selection window appears on the monitor.
2. Press F2 and the Advanced Menu screen appears. The highlight is in
the Commands menu.
3. Using the Up and Down arrow keys, move the highlight to Snapshot
and press Enter. The hardware settings for all connected ports are now
saved to memory.
Resetting the Mouse and
Keyboard
To reset the mouse and keyboard settings for the selected computer, perform
the following:
1. Press Print Scrn. The CCR Selection window appears on the monitor.