V.I.O. POV.1 - Manual (Page 36)

36 POV.1 Recorder
•
•
•
•
•
•
• replace the O-ring on the top of the C-clamp to secure the camera head
in the clamp
The camera head mounted in C-clamp with O-ring in place
Base mounts
The C-clamp fixture is designed to work with a base mount. The base mount
is a small section of rail with a groove in the middle of it. This rail conforms
to the Picatinny rail system that is commonly used in the firearms industry.
Two base mounts are provided with the POV.1:
• a wide flange base mount
• a tubular rail base mount