Pigtronix Echolution-2 Deluxe - Manual (Page 4)

Jacks
Power - 18VDC (2.1mm neg. tip) 100mA or higher is
required.
Input 1 - Connect instrument here
Input 2 - Connect instrument here
Note: When only one of the two audio inputs is connected,
that single input will be processed in stereo.
Output 1 - Connect amplifier, mixer, DAW here
Output 2 - Connect amplifier, mixer, DAW here
MIDI IN - Accepts MIDI preset change, MIDI CC inputs (see
MIDI map) for all functions as well as MIDI beat clock to set
the delay time. When a MIDI signal is present, the red MIDI
LED in the upper left corner will illuminate.
EXP - TRS expression pedal goes here. Use a low-
impedance foot controller.
(Wiper = tip, Toe = ring, Heel = Sleeve.)
REMOTE - E2R or compatible TRS momentary remote
switch goes here.
Jump = tip, Freeze = ring, Common = Sleeve
MIDI OUT - Sends out MIDI beat clock that is exactly 4x the
value of the current delay time setting.