Pigtronix Echolution-2 Deluxe - Manual (Page 9)

JUMP and FREEZE using the optional E2R Remote Switch
The Echolution 2 remote switch port can be set up to work
in two different ways. When it is shipped from the factory,
the Echolution 2 is programmed so that the Remote
instantly switches between the top four presets in each
bank as detailed above, regardless of the ENGAGE status.
To enable the JUMP and FREEZE functions of the Remote,
power up the Echolution 2 pedal while holding the TAP
TEMPO footswitch.
When JUMP and FREEZE are enabled, the E2R remote will
only allow you to switch between presets instantly while
the Echolution 2 is bypassed.
Once the JUMP and FREEZE remote functions are enabled,
the Echolution 2 will remember this preference after it is
powered down. To disable JUMP and FREEZE and restore
the preference for instant preset access, simply power up
the Echolution 2 while holding the TAP TEMPO switch.
Touch Switches
The only difference between the Echolution and Echolution
2 Deluxe is the presence of 8 touch switches and 30 LEDs
on the deluxe model. The features controlled by the touch
switches found on the Echolution 2 Deluxe can be accessed
using the standard model of the Echolution 2 via the
PC/MAC Application.