Jacks – Pigtronix Rototron User Manual
Page 5
CHAPTER 2. ANATOMY
4
Ramp
This knob determines the time it takes for the effect to change between
the Slow and Fast speed settings.
The Ramp knob will also control the rate of acceleration and deceler-
ation when using the Brake function.
2.3
Jacks
DC Power
We recommend you use the 18-Volt, 300mA, negative-tip power sup-
ply that came with your Pigtronix Rototron. Any approved 2.1mm
negative-tip regulated power supply with at least 100mA of current
will work. Using the wrong power supply is likely to result in a dam-
aged pedal.
In 1
Instrument Input 1. This is main input to use with a mono source
such as a guitar.If your instrument has stereo outputs, use this jack
as the left channel.
In 2
Use Input 2 for the right channel of a stereo instrument. When the
Rototron is engaged, it processes audio from Input 1 only. When by-
passed the true stereo audio from the inputs is passed to both outputs.