Vernier LabQuest 2 User Manual
Page 35
Using LabQuest 2 with a Mobile Device
31
c. Verify LabQuest is attempting to create a
network. The network status should say
“Connecting.”
d. Verify LabQuest has successfully created a
network. The network status should have
changed to a numeric IP address.
e. When LabQuest has successfully created network, tap OK to return to the
Connections app.
Note: Some Android implementations seem to have trouble viewing and connecting to ad-hoc
networks. These devices require the use of an existing (infrastructure) network.
Enable Data Sharing on LabQuest
In addition to connecting to a Wi-Fi network, you will need to set up LabQuest as a Data Sharing
Source using the following instructions.
1. Launch the Connections App from the Home screen.
2. Optional: To easily identify this LabQuest unit,
you can give the unit a unique name. To do this,
tap the Name field gear.