Vernier LabQuest 2 - Manual (Page 38)

Using LabQuest 2 with a Mobile Device
34
Connect Your Mobile Device to LabQuest
After setting up LabQuest as a Data Sharing source, you can then connect to this source from
your mobile device using a data sharing app (Data Share web app or Graphical Analysis for
iPad) on that device.
Access LabQuest 2 Data Using the Data Share Web App
1. Launch the Connections App from the Home screen.
2. Connect your mobile device to the same Wi-Fi network to which you connected
LabQuest 2.
3. On your mobile device, open a supported browser and enter the Data Sharing Source
Address. Alternatively, if you have a QR code reader on your device, you can access this
via the provided QR code.
Access LabQuest 2 Data Using Graphical Analysis for iPad
1. Connect the iPad to the same Wi-Fi network to which you connected LabQuest 2.
2. Launch Graphical Analysis on the iPad.
3. In Graphical Analysis, tap the Source button in the top-left corner. Discovered Data
Sharing Sources will be listed automatically.
4. Tap the name of the LabQuest 2 source to connect. If your LabQuest 2 source is not listed
in Data Sharing Sources, you can connect by choosing Specify a Source or Scan Source
QR Code.
For information on Graphical Analysis, see the User Manual on our web site.