Sangean U4 DBT (V1) - Manual (Page 26)

5
Presetting stations - DAB and FM
You may store your preferred DAB and FM radio stations to the
preset station memories. There are 0 memory presets in your ra-
dio 5 for DAB and 5 for FM. Presets are memorized by your radio
in the event of a power failure.
The procedure for setting presets and using them to tune stations
is the same for FM and DAB mode, and is described below.
. Press the Power button to switch on the radio.
. Press the Source button to select the DAB or FM waveband.
3. Tune to the required station as previously described.
4. Press and hold the Preset button until the display shows, such
as,‘Preset  stored.’The station will be stored under the chosen
preset button. Repeat this procedure as needed for the remaining
presets.Stations stored in preset memories may be overwritten
by following the above procedure.
Recalling a preset station- DAB and FM
. Press the Power button to switch on the radio.
. Press and release the required waveband by pressing the
Source button.
3. Press and release the required Preset button to cause your radio
to tune to the station stored in preset memory.
Note:
The display will show 'Preset Empty' if no station has been stored
to that preset.