Cary Audio Design CD 200 - Manual (Page 10)

SERVICE AND CARE
4.1 CD-306/200 Care and Cleaning
The housing and front of the CD-306/200 may be cleaned with a soft cloth and windex or a
window cleaner. The frequency of cleaning will be governed by how many hours the
CD-306/200 is operated and by operating environment cleanliness. Do not use benzene, harsh or
abrasive chemicals to clean the front as they may remove or damage the labels.
4.2 Factory Service
Careful consideration has been given to the design of your CD-306/200 HDCD CD
Transport/Processor to keep maintenance problems to a minimum. Any service problems
should be referred to our Customer Service Department phone number (919) 481-4494. DO
NOT return the CD-306/200 to the factory without a return authorization number (RMA) from
the Customer Service Department.
Cary Audio Design, Inc. will assume no responsibility if the shipping company refuses to pay
a damage due to your improper packing or lack of insurance should the unit be lost or damaged
in shipment. Please retain and always use the original shipping carton for the CD 306/200 in the
event that you move or after service is needed.
WARNINGS
MAKE NO ATTEMPT TO PUT THE CD-306/200 IN
SERVICE WITH THE COVER REMOVED. CONTACT WITH
POWER SUPPLY SECTION FOUND IN THE UNIT CAN BE
FATAL!! COMPLETELY REMOVE AC POWER PLUG FROM
THE WALL BEFORE SERVICING OF THE PLAYER.
CAUTIONS
NEVER REMOVE / INSERT PLUG WHEN UNIT IS ON OR
THE AC POWER SWITCH IS IN THE ON POSISTION.
!!PLEASE OBSERVE THE SAFETY DIRECTIONS IN THIS MANUAL!!
P.9