Cary Audio Design CD 200 - Manual (Page 8)

3.7 Normal Playback
-
Press POWER or on the remote.
- Open the CD Compartment by pressing OPEN/CLOSE.
- OPEN lights up.
- Insert an audio CD, printing side up and close the compartment.
- CLOSE lights up, the number of tracks and the playing time of the CD are shown on the
display.
- Press the PLAY or on the remote to start play.
- The number indicator shows how many tracks are on the CD; when a track has been played
its number disappears.
- The track being played blinks and its elapsed playing time is shown.
- Play will stop after th rack. e last t
- Press POWER or on the remote to switch the player off.
- You can interrupt playback by pressing PLAY or on the remote.
- You can restart play by pressing PLAY or or on the remote.
- You can stop playback by pressing STOP, OPEN/CLOSE or on the remote.
3.8 Selecting Another Track During Play (1-10)
Key in the desired number
The music stops and a moment later the selected track begins to play. You can also select the
number by pressing (less than 0.5seconds).
3.9 Searching For a Passage During Play ( on the remote)
;
- Then at the maximum speed, with no sound.
3.10 Starting with a Particular Track (1-0)
- Key in the desired number
- Play starts from the selected track automatically.
You can also select the number by pressing
(less than 0.5 seconds).
P.7