Sangean DPR-26BT (V1) - Manual (Page 21)

0
GB
Stereo/Mono setting – FM
Your radio will play stereo broadcasts in stereo so long as the received signal is of adequate
strength. However, as a stereo signal becomes weaker, the audio signal will become poorer. It
may be preferable to force the radio to play the station in mono in order to reduce the level of au-
dio noise.
. Press the On/Off button to switch on your radio.
2. Tune to the required FM radio station as previously described.
. Press the Select button to switch between mono and stereo.
Note: your radio default is mono.
89.30 MHz FM
Stereo
89.30 MHz FM
Mono
1
3