Sangean DAR-101 (R1) - Manual (Page 31)

30
GB
6. The hour digits of the STOP TIME will begin flashing. Rotate the Tuning control to select the
hour as required, and press the Enter button to confirm the setting. Then the minute digits of
the stop time will begin flashing. Rotate the Tuning control to select the minute as required,
and press the Enter button to confirm the setting. Now the setup of timer record is complete.
Note:
When the mic is chosen as the recording source, the recorder will automatically record from the
external mic if microphones are plugged into the mic inputs,. If not, recorder will record from the
internal microphone.