Sangean RCR-3 (R2) - Manual (Page 12)


GB
C. Presetting and recalling stations
Presetting stations:
. Press the Standby button to turn on your radio.
2. Press the BAND button repeatedly to select AM (MW) or FM
waveband.
3. Tune into the station that you would like to preset.
4. There are 7 preset buttons from  to 7. Press and hold one of
preset buttons until the radio beeps, and the station frequency
will be saved into the chosen preset.
5. Repeat the procedure for the remaining presets. Your radio has
7 presets for each AM and FM.
6. The preset can be overwritten by following the above procedure.
Recalling stations:
1. Press the BAND button for AM or FM.
2. Press and release one of the PRESET buttons (from 1 to 7) and
the preset number and frequency will appear on the display.