Sangean RCR-3 (R2) - Manual (Page 14)

3
GB
. Press the Info button to cycle through the various modes.
a. Station name Displays the name of the station being
listened to.
b. Programme Type Displays the type of station being
listened to e.g. Pop, Classic, News, etc.
c. Radio text Displays radio text message such as,
new item etc.
If there is no RDS data available (or if the signal is too weak) then
the radio will display only the FM frequency.
Setting the clock time
Radio-controlled clock
There are three options to set up the clock time:
Radio-controlled clock, FM Radio Data System (RDS) and Manual
setting. When the unit is first plugged in, the radio will automatically
synchronize its clock time with the Radio-controlled clock signal
received while the radio is in power off mode.
. To set up the clock time using the Radio-controlled clock function,
press and hold the INFO/MENU button when the unit is in power
off mode.
2. Press the TUNING up/down button until a clock symbol appears
on the display. Press the BAND/SELECT button to enter the
menu setting.