Sangean WFT-2D (V1) - Manual (Page 60)


Setting the alarm clock
Your radio has two separate alarms which can be set to wake you to either the radio, iPod or a
buzzer alarm. In the event of a power interruption your radio has built in memory that will retain
your alarm settings. Ensure that the time is set correctly before setting the alarms. When setting
the alarm, there are several options which you must specify these are as follows:
Alarm 1 or Alarm 2
Enable: Off (Alarm will be disabled), Daily, Once, Weekend, Weekday
Time
Mode: DAB, FM, iPod, Internet Radio, Last.fm and Buzzer
Volume: The radio uses the saved volume setting for each alarm when it sounds.
Note: When setting the alarm to Once you will need to set the correct date and time. If the radio
has been set to use a 12 hour clock format, there will also be an option here for setting AM or PM
for the alarm time.
Note: When DAB or FM radio mode is selected, the radio alarm may be set to any of the
stations which have been stored as favorites or to the station most recently listened to. Touch My
Favorites if you wish to change it. Note that you can only set the alarm to use a favorite which
has already been stored.
From the home menu press the Alarm mode button.
Scroll through the alarm menu and touch the required menu item.
Alternatively the alarm setup can be accessed via the Settings mode button.
Alarm settings
Alarm 1 On
Alarm 2 On
15:05 26 Jun 2010
My Music
Alarm 1 settings
Enable Daily
Time 09:30
Mode Buzzer
Volume 15
15:05 9 Nov 2009
Alarm Set alarm frequency
Daily
Once
Weekend
Weekday
15:05 26 Jun 2010
Alarm