Sangean WFT-2D (V1) - Manual (Page 71)

GB
70
Information
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following this
procedure. By performing a factory reset, all user entered settings will be erased.
From the home menu press the Settings mode button. The main settings menu will be
displayed.
Select Miscellaneous settings.
Select Factory reset and then touch Yes to proceed. A full reset will be performed and the radio
will restart as if first plugged in. The DAB stations list together with any preset stations will be
erased and your wireless network connection details will be lost. All configuration settings will be
restored to their defaults, the clock and alarms will be reset.
If you do not wish to carry out a system reset, touch No the display will revert to the previous
menu.
In case of malfunction for any reason, reset the product as described above to resume normal
operation. It may be necessary in some cases to disconnect the mains power, then reconnect
power after 10 seconds.
In case of malfunction due to electrical fast transient (burst), reset the product as above
(reconnection of the power source may be required) to resume normal operation.
Miscellaneous settings
Check for updates
Display backlight
Software version
Factory reset
15:05 26 Jun 2010
Settings
Settings
Are you sure?
Yes No
15:09 26 Jun 2010