Talkaphone ETP-CDMA-V CDMA Cellular Interface User Manual
Page 5
ETP-CDMA-V
– Cellular Interface
Installation Instructions
Page 5 of 6
Rev. 12/12/2014
Copyright 2014 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement, sponsorship, or affiliation
with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
6. Using the built-in mounting flanges, attach the ETP-CDMA-V Cellular Interface onto the internal
mounting panel of the Talk-A-Phone enclosure (e.g. ETP-MT/R-OP-SOLAR). The ETP-CDMA-V
Cellular Interface should be mounted so that the 12VDC input terminal is on the lower right corner (i.e.
toward the Earth).
Figure 4.
This photo illustrates the appropriate mounting position and orientation for the ETP-CDMA-V Cellular Interface.
VI. Activation and Provisioning of Verizon Wireless Cellular Service
Locate the
MEID
1
printed on the product packaging or on the ETP-CDMA-V Cellular Interface. The
MEID
is a 14-
character hexadecimal code. The
MEID
for each ETP-CDMA-V Cellular Interface will need to be collected in
advance.
Contact your Verizon Wireless representative and inform them of the
MEID(s)
that require activation and
provisioning.
Before a new ETP-CDMA-V Cellular Interface can be put into service for full operation, provisioning will need to
be completed by Verizon Wireless. Provisioning is a required over-the-air procedure that configures the ETP-
CDMA-V Cellular Interface to operate on the Verizon Wireless network. During this process, Verizon Wireless
will assign a telephone number for each
MEID
or ETP-CDMA-V Cellular Interface.
1
Mobile Equipment IDentifier
Earth
12VDC
Input Terminal