Talkaphone HS-RF-1 Wireless Headset - Manual

HS-RF-1 Wireless Headset System Installation Instructions
Copyright 2009 Talk-A-Phone Co. All rights reserved.
Talk-A-Phone
Co. • 7530 North Natchez Avenue • Niles, Illinois 60714-3804 Rev. 7/27/09
Phone 773.539.1100 • Fax 773.539.1241 • [email protected] • www.talkaphone.com
All prices and specifications are subject to change without notice.
Portions of these Installation Instructions are derived from the Plantronics SC55 Series Setup Guide, ©2007 Plantronics, Inc.
Plantronics, SC55, and IntelliStand are trademarks of Plantronics, Inc.
Talk-A-Phone, Talk-A-Lert, Scream Alert and WEBS are registered trademarks of Talk-A-Phone Co.
I. Wireless Headset Package Contents
1. Headset
2. Setup
Guide
3. Headset Base
4. RJ-11 cable
5. Base Power Adapter
6. Headband
7. Ear
loops
II. Attach Headband or Ear loop to Headset and Adjust fit
Snap the speaker of the headset into the retaining ring of the headband or one of the three ear loops
provided.
III. Connect Base to the IW-HFM-4 Master and connect to Power
Connect one end of the RJ-11 cable to the headset base as shown.
Connect the other end of the RJ-11 cable to the Headset port of the IW-HFM-4 Master.
Connect Headset base to the power outlet.