Storix Software SBAdmin Linux System Recovery Guide - Manual (Page 75)

When you have finished your selections, press ESC or to return to the RIM Menu . Then select Start Local SSH
Server . The network adapter will be configured with these settings and the RIM server will be started. You can
see the current status of the RIM server by looking at the Local SSH settings which appear on the screen.
Configure Backup Group ID
This option is used if you have configured a server with an “Optional client with access to all groups”. For further
information about configuring the server this way please see the
SBAdmin User Guide .
If a backup has been copied to a shared server, the new group id will not match the group id of the original
client backup. When restoring from the shared server, you will need to ensure a client is configured with access
to all groups, and you have the appropriate group ID.
To change the groups ID simply begin typing and it will replace the old group id. Press the escape key to save
the new setting and return to the previous menu.
Storix System Backup Administrator 75 Version 8.2 Linux System Recovery Guide