CANOGA PERKINS Multiplexer 6002 - Manual (Page 18)

EdgeAccess ® Universal Chassis System
6002/6003/6004 WWDM Users Manual 4-2
Figure 9. Chassis Management Screen Showing Inserted Modules
To access inserted modules from the UCS DMM Chassis Management screen:
• Press the SPACE BAR to move the cursor to the desired Slot number (refer to Figure 9).
• When the selected Slot number 4 is highlighted, press the CR (Carriage Return / Enter key).
• The WDM Information screen will appear, identifying the data of a polled module. All
information that the DMM gathered for the selected module is shown in Figure 10.
• Press the SPACE BAR to select another installed component (reference Slot number 5).
• Press the ESC (Escape key) to return to the previous screens.
Figure 10. WDM Information Screen for the WWDM Model 6002
The DMM will show that two Model
6002-LightWave Modules are inserted
into Chassis 1 on the LOCAL UCS.
The Status of Slots 4 & 5 will show OK.
The WDM Information screen will show
WWDM Model 6002 information – no customer
configurable prompts are available.
Press ESC to go to previous screen.