CANOGA PERKINS Multiplexer 6002 - Manual (Page 20)

EdgeAccess ® Universal Chassis System
6002/6003/6004 WWDM Users Manual 4-4
Naming the Chassis / Slot number of the installed module:
• The Module Menu screen will appear, note the example in Figure 12 shows that the 6002-
LightWave module is inserted into Chassis 1, Slot 4.
• Choose number 1, or “Name the module”, then press <Enter>.
• Type in the desired new name at the “Enter new name” prompt line, note the example shows
“Canoga Perkins-2” as the entered name.
Note: Do not exceed 16 characters when choosing a circuit designation path or new name.
Figure 12. Entering a Descriptive Name for the 6002 Module
Adding a name for the Model 6002 that is
loaded into Chassis 1, Slot 4:
Canoga Perkins-2 – or use circuit
designations, e.g. C1-4 (Chassis 1, Slot 4)