CANOGA PERKINS Multiplexer 6002 - Manual (Page 13)

EdgeAccess ® Universal Chassis System
6002/6003/6004 WWDM Users Manual 3-1
Chapter 3
User Operation
3.1 WWDM Application
WWDM (widely spaced wavelength division multiplexer) models multiplex and demultiplex
wavelengths in the 1310nm, 1480nm, and 1550nm windows, and are protocol, speed, and line
code transparent. Each 6002/3/4 model is unidirectional (meaning that light travels in only one
direction on a fiber line) and transmits signals through a composite pair of single mode fibers.
Customer devices transmit (Tx) and receive (Rx) channel-to-channel signals through the local
WWDM. Optical signals are received and demultiplexed with isolation levels that minimize
channel crosstalk.
Note: The 6002/3/4 rack mount models used in a chassis configuration contain EEPROM’s for
identification and management purposes. The stand alone models are non-powered units, which
have no user configurable switches and require no special jumpers.
For the correct fiber optic cable application see the WWDM Installation Diagram in Figure 4.
Note: All optical connections must be cabled using the Tx to Rx and Rx to Tx scheme.
Important: Do not over tighten FC/PC connectors or damage may occur.
Figure 4. WWDM Installation Diagram