CANOGA PERKINS Multiplexer 6002 - Manual (Page 19)

EdgeAccess ® Universal Chassis System
6002/6003/6004 WWDM Users Manual 4-3
4.2 Naming the WDM module in a Chassis Configuration
In many applications, it may be beneficial to name the WDM module in the UCS Chassis or the
circuit path that it is part of. This identification feature is useful to name the circuit designations
of all connected modules. When multiple customers are serviced with a single 6002/3/4 module,
a customer name can be included for effective system management.
Accessing the Chassis / Slot number of the installed module:
• From the Main Menu screen (refer to Figure 8), select number 4, or “Manage or access a
specific Module”, then press <Enter>.
• The Select Module Menu screen will appear as shown in Figure 11.
• You will be prompted to enter the desired Chassis and Slot numbers where the installed
6002/3/4 module resides.
• Enter the Chassis / Slot numbers as requested; type in 1 / 4, then press <Enter>.
Figure 11. Accessing the Select Module Menu