BendixKing KFD 840 - Manual (Page 32)

Honeywell Bendix/King KFD 840 Primary Flight Display
Getting Started KFD 840 PG PN 7450-0840-01
2-14 Rev C May 28, 2010
© Honeywell International Inc. Do not copy without express permission of Honeywell
Press the right knob to cycle through the displayed parameters.
Figure 2-10: KFD Flight Settings Page Part 2
When the desired selection is highlighted, turn the right knob to
change the setting of the highlighted parameter.
To save the setting change press the SAVE function below the
display. The SAVE annunciation will be removed indicating the
setting has been saved.
To exit the KFD Flight Settings page after saving the settings press
the RETURN function key.
To exit the KFD Flight Settings page without saving press the
RETURN function key.