BendixKing KMD 150 - Pilots Guide - Manual (Page 36)

22
Rev 2 Oct/2002 KMD 150 Pilot's Guide
joystick to dial in the required latitude and longitude, followed by ENTER.
The unit will then provide you with full navigation information to reach this
Temporary Waypoint point. This function is not available in External
GPS Mode.
MANUAL DIRECT TO AND DATA INTERROGATION
Provided the pointer is
not active in MAP mode,
press the DIRECT TO
key. You will now be
able to select the item
from the database as
explained in Database
Selection in this section
of the manual. To
DIRECT TO the item
press the SELECT key
when the desired item is
displayed. To get more
information on the item
press the MORE INFO key when the desired item is displayed. If you
are running a DIRECT TO an item, you can discontinue the navigation
by pressing the DIRECT TO OFF key. This function is not available in
External GPS Mode.
EDITING/CREATING A USER WAYPOINT MANUALLY
From MAIN MENU select
the FLIGHT PLAN key,
followed by USER
WPTS. Use the joystick
to select the desired user
waypoint number or
name. Then press the
EDIT key and use the
joystick to edit the NAME,
LAT and LONG fields.
The entire user waypoint
can be deleted by
pressing CLEAR WPT. If
you only wish to delete
data in a particular field, as opposed to the entire user waypoint, move
the cursor over the field label (i.e. NAME, LAT, LONG) and press the
CLEAR key. To save a user waypoint press SAVE & EXIT.
Use the ABORT key and the PREV PAGE key to return to MAIN MENU.
This function is not available in External GPS Mode.
Getting Started