C. Crane CCRADIOplus Platinum - Manual (Page 11)

CCRadio plus Page 11
Radio Operation
Manual Tuning
1) Press the Power Button to turn on the radio.
2) Select the band by pressing the Band Button.
3) A single press of the Up or Down Tuning Buttons will
change the frequency up or down for AM and FM bands,
and channel up or down for Weather and TV bands.
Each press of tuning Up and Down buttons will change the frequency
by 10 KHz in AM mode and 100 KHz in FM mode.
Scan Tuning
Same as above except press and hold the Tuning Up or
Down Button for more than .5 second. The radio will scan and
stop automatically when it finds an active station. The Scan Tuning will
not work on the weather band. It may also stop scanning on strong
interference or noise. Press and hold again to resume.
Rotary Tuning
Rotating the tuning knob will change AM/FM by frequency and the
weather/TV bands by channel.
Memory Tuning
Five stations may be stored into memory in each
of the four bands.
1) Tune to the station or channel you want to memorize.
2) Press and Hold the desired Memory Button for two seconds or
until you hear a beep. The station or channel is then memorized.
The display will show the memory number.
To recall the memorized station, select the correct band and press and
release the Memory Button. The radio will instantly tune to the station
stored in memory. If the button is held down, the station you are tuned
to will now be stored in that memory position.
The CCRadio plus features four bands: AM / FM / TV Audio 2-13
and Weather.
TUNING