Radio operation – C. Crane CCRADIOplus Platinum User Manual

Page 17

Advertising
background image

CCRadio

plus

Page 17

Radio Operation

S

TEP

2: T

O

S

ET THE

OFF TIME

1) Press the Timer/Set Button again until the word

OFF

, the hour digit

and

TIMER

flash on the display.

2) Use the Tuning Up/Down Buttons to set the hour. Again, verify that

the time is set correctly for AM or PM.

3) Press the Timer/Set Button again so the word

OFF

and

TIMER

and

the minutes, flash on the display.

4) Use the Tuning Up/Down Buttons to set the minutes.

S

TEP

3: T

O

S

ET THE

F

REQUENCY

1) Press the Timer/Set Button again to select your desired frequency.

The word

TIMER

and the memory preset will flash on the display.

Using the Band Button, select the appropriate band (AM, FM, TV or
WX). Press the memory button 1-5 that corresponds with your
desired station.

2) You must Press the Timer/Set Button again to complete the

setup.

The timer will go ON and OFF at the same time and same station
every day until you turn the timer off or reprogram it.

To Turn Off The Timer
If

TIMER

is showing on the display then the Timer is set. Press and hold

the Timer/Set Button until you hear a short beep and the word

TIMER

disappears from the display.

NOTES ON THE TIMER

The timer can be used to play your favorite program every day.

To stop the timer from going off every day press and hold the
Timer/Set Button until you hear a short beep the word

TIMER

disappears.

Once the timer is programmed, you may use your radio as normal. If you
are using the radio during a “timed” operation, the radio will automatically
switch to the programmed station, and turn off at the programmed OFF
TIME.

The word

TIMER

flashes while the radio is playing in Timer Mode.

Advertising
This manual is related to the following products: