C. Crane US3R - Manual (Page 10)

Page 10 Super USB WiFi Antenna 3
Mac OS 10.3 – 10.7 Installation
12. MAC OS 10.5 and MAC OS 10.6 users: Click “Net-
work Preferences …
” and then click “Apply” to ac-
tivate the antenna. 10.7 skips this step.
MAC OS 10.3 and 10.4 users:
Go to the “System
Preferences
” panel and then click “Network”. A
message displays “New Port Detected”. Click “OK”
and then click “Apply” to activate the antenna.
11. When the computer is fully powered on, plug in the
Super WiFi USB Antenna
into your computerʼs USB
port
. If you have two USB ports available, both con-
nectors can be plugged in for better performance. If
you only have one USB port available, the antenna
will still work well. USB cables plug in just one way
and should not be forced in.
Note:
During Restart, an “Updating Boot Caches”
screen will appear. Click “OK” and the restart will con-
tinue.
For Outdoor Use:
We recommend using the supplied
rubber grommet between the antenna and the cable, to
protect the antenna connector from weather.
Note:
When connecting the USB cable to the Super USB
WiFi Antenna, be sure that it is tightly connected and that
there is no gap between.