C.R.Plastic Products F03 - Manual

Product: Pullout Footstool (F03)
Your purchase and who is C. R. Plastic Products Inc?
Parts: You will need:
A: Footstool
B: 1 X 3 Rails
C: Screw Pack
Power or Cordless Drill
Step 5: Stand chair back up on its legs.
Step 6: Slide footstool onto rail.
#2 Robertson or
Phillips Driver Bit
C. R. Plastic Products Inc. is an environmentally conscious Canadian company.
Our "Generation Line" of recycled furniture will give you years of comfort, style
and maintenance free enjoyment. You will find your furniture to be waterproof
and durable. By choosing this product, you are saving generations of trees and
are reducing the burden on our landfill sites. Thank-you for purchasing from
C. R. Plastic Products Inc.
Step 1: Tilt chair onto its back.
Step 3: Remove the bottom 2 seat slats from the chair.
Step 2: Line up 1x3 Rail to seat slat under chair, make sure that the end with
the 2 drilled holes is closest to the seat slat. Also Make sure the side of rail is
lined up with the seat rail of the chair.
Step 4: Using the 4 screws from the removed seat slats, place a third and forth
screw in each seat rail.
Proudly Made In CANADA