CANOGA PERKINS 2461 E1 Modem - Manual (Page 67)

EdgeAccess Universal Chassis System
2461 Modem User Manual 8-3
4. When the File Download screen appears, select Save this Program to Disk.
5. When the Save As dialog box appears, choose the root directory of your server as the location
to save the download.
If Web access is a problem, call Canoga Perkins Customer Service to see if a newer version is
available.
8.3 Installing the New Software
Instructions for installing software into the rack mount modem (in a UCS Chassis) via DMM will
differ from installing into a stand alone modem.
8.3.1 Installing in a Managed UCS Chassis
For these instructions, please refer to the DMM users manual.
8.3.2 Installing into a Stand Alone Modem Via TFTP
This installation is performed over the dial-up network and requires that the stand alone modem
has the SNMP option. If this option is not activated, and you would like to activate it, contact
Canoga Perkins Sales.
To upgrade and install the new software version: (The following steps assume that the TCP/IP
stack has been activated for this modem.)
Figure 47. To download a software revision, type "3" from the Software Upgrade screen
1. From the Main Menu, type "6" and press Enter.
2. Use the TFTP feature here to download the software to the inactive flash region of the
modem.
3. Make sure the new firmware file is in the root directory of your TFTP server (The TFTP
server must be running).